20KV insulation piercing clamp

Specification:

1)      Item No.:KW20

2)      Main line(mm²):  50-240

3)      Branch line(mm²): 50-240

4)      Nominal current(A): 214

5)      Bolt number:2

6)      Application Voltage:20KV

Feature :
1)Simple installation, small contact resistance and low temperature rise of the clamp
2)The applicable voltage is 20KV,10KV, 1KV or less than 1KV.

3)Piercing connector,simple installation,need not strip the cable coat.

4)Moment nut, piercing pressure is constant,keep good electric connection and makeNo damage to lead.

5)Self-seam frame,waterproof,waterproof,and anti-corrosion,extend the using life ofInsulated lead and connector.

6)Adopted special connecting tablet, apply to joint of Cu(Ai) and Cu(Ai)  or Cu and Ai

7)Small electric connection resistance, impulse current can be up to 15ka.

8)Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 6kV.

9)Aac surface design, apply to connection with the same (different) diameter, wideconnection scope (0.75 mm²-400 mm²)

Mainly application:

the connection of main circuitries, the connection of main circuitry and outdoor circuitry, the connections of main circuitry and electric appliance and street lamps

Applicable to T connection of structural distribution system, the connection of airy
low voltage insulated cable, or indoor electric wire, distribution system of
street lamp.
Can be installed with online line and can work without power.